An english man in 2cv-Legend !
Modérateurs : Deuchémoi, zamzam, Eric13190
- old2cvman
- Deuchiste intéressé
- Messages : 79
- Enregistré le : 27 janv. 2018, 21:24
- Ma deuche : A Deuche modifications Doctor with 63 years experiences on rebuilds
- Date de naissance : 15 sept. 1931
- Localisation : liverpool. england
- Âge : 92
An english man in 2cv-Legend !
Hello all readers: I sustained suspension damage to my 52 year old 2.C.V. on January 12th 2018, going over a road speed Bump Block and then immediately hitting a huge pot hole on the road adjacent to this slowing down traffic hazard.
The next thing my nearside suspension drooped over dramatically scrapping the exhaust along the ground.
It happened only a mile from my house front so I was able to get my car home, but driving it up on my slope front was a chore.
Next day I was under the Car on my Back... absolute Freezing weather conditions examining the havoc... I had to face.
Eventually stripping all the exhaust system and the suspension cylinder, of the under side of my vehicle... a Chore to an 86 years of age veteran Citroen man.
The internal spring in the Cylinder had torn the end right of, and gunge every were, a real tough job for any enthusiast D.I.Y. man.... however I managed to re manufacture the Cylinder, and I also obtained a secondary internal spring which I cut into 2 segments of 3 coils , which I inserted to stiffen up the suspension... then I re welded the end cap back on the cylinder, as a extra Bonus , I obtained a tall Stainless Steel Office waste Paper collector Bin, which cut into to sections length wise, with an thin blade Angle grinder, and fabricated it around the cylinder as a second coat, I also made metal strapping bands to go around the cylinder to secure them with a bolt through .
I also did a similar operation and re manufactured a new exhaust system.... this has taken several days weather permitting , but I Triumphed yet again.... Ingenuity was the Mother of Invention... thats always been my Motto.
The next thing my nearside suspension drooped over dramatically scrapping the exhaust along the ground.
It happened only a mile from my house front so I was able to get my car home, but driving it up on my slope front was a chore.
Next day I was under the Car on my Back... absolute Freezing weather conditions examining the havoc... I had to face.
Eventually stripping all the exhaust system and the suspension cylinder, of the under side of my vehicle... a Chore to an 86 years of age veteran Citroen man.
The internal spring in the Cylinder had torn the end right of, and gunge every were, a real tough job for any enthusiast D.I.Y. man.... however I managed to re manufacture the Cylinder, and I also obtained a secondary internal spring which I cut into 2 segments of 3 coils , which I inserted to stiffen up the suspension... then I re welded the end cap back on the cylinder, as a extra Bonus , I obtained a tall Stainless Steel Office waste Paper collector Bin, which cut into to sections length wise, with an thin blade Angle grinder, and fabricated it around the cylinder as a second coat, I also made metal strapping bands to go around the cylinder to secure them with a bolt through .
I also did a similar operation and re manufactured a new exhaust system.... this has taken several days weather permitting , but I Triumphed yet again.... Ingenuity was the Mother of Invention... thats always been my Motto.
- Fichiers joints
-
- Citroen collapsed front viewing ..JPG (125.37 Kio) Vu 8632 fois
-
- Citroen N.S. Spring close-up..JPG (125.15 Kio) Vu 8632 fois
-
- Citroen PEKO exhaust..JPG (118.23 Kio) Vu 8632 fois
-
- Re Mounting New Cylinder.JPG (105.38 Kio) Vu 8632 fois
-
- Citroen very low back suspension broken. Jan 12th 2018.JPG (125.49 Kio) Vu 8632 fois
-
- Cylinders in the making process. 4th pic..JPG (117.02 Kio) Vu 8632 fois
-
- Citroen Suspension removed. 3rd pic..JPG (128.73 Kio) Vu 8632 fois
-
- Citroen Suspension Cylinder removed 1st pic..JPG (128.48 Kio) Vu 8632 fois
-
- Exhaust dragging view Nearside of vehicle..JPG (129.95 Kio) Vu 8632 fois
-
- Suspension Cylinder Bust opened with impact , Jan 2018.JPG (130.81 Kio) Vu 8632 fois
- bob41
- Docteur deuchiste
- Messages : 8687
- Enregistré le : 09 mai 2016, 16:00
- Ma deuche : 2CV A 50 ; 2CV AZ 59 ; 2CV azam 65 ; 2CV 6 79 ; Dyane 67 ; AMI6 62 ; AMI8 77 ; HY 72 67
- Date de naissance : 10 mars 1940
- Localisation : Sologne viticole (Contres) et Corse (Loreto-di-Casinca)
Re: Restaurations de la 2CV6 de Vio68
old2cvman
A little introduction in the café deuchiste, please. :shock:
Avec tout le poids que tu as rajouté c'est pas étonnant que ta suspension ait cassé. :lol:
Chassez le naturel, il revient au galop.....
PS Les modérateurs vont déplacer le post, I suppose !
A little introduction in the café deuchiste, please. :shock:
Avec tout le poids que tu as rajouté c'est pas étonnant que ta suspension ait cassé. :lol:
Chassez le naturel, il revient au galop.....
PS Les modérateurs vont déplacer le post, I suppose !
- Deuchémoi
- Docteur deuchiste
- Messages : 14868
- Enregistré le : 19 sept. 2009, 17:09
- Ma deuche : 2cv6 Spécial AZKA Bleue céleste 11/87
- Date de naissance : 30 oct. 1968
- Localisation : Vitrolles (13) ... au soleil !!!
Re: An english man in 2cv-Legend !
There it is !!Bobby a écrit :PS Les modérateurs vont déplacer le post, I suppose !
:D
Welcome on board Old2cvman !
Even if I understand the most important part of your explanation, I'm sure I've missed some details ... We'll mait for a translation ...
Daithiiiiiiiii !! (who is a irish french drômois ! :D )
Pas de demande d'aide mécanique en Message Privé. Toutes les demandes se font dans les salons publics. Merci !
/¯\(°\=/°)... Ma présentation
2cv6 Spécial AZKA Bleue céleste 11/87
- Daithi
- Deuchiste intéressé
- Messages : 80
- Enregistré le : 17 mai 2017, 22:10
- Ma deuche : 2CV AZ A 15 juillet 1969
- Date de naissance : 14 juil. 1969
- Localisation : Irlande sur Drôme
Re: An english man in 2cv-Legend !
Deuchémoi a écrit :There it is !!Bobby a écrit :PS Les modérateurs vont déplacer le post, I suppose !
:D
Welcome on board Old2cvman !
Even if I understand the most important part of your explanation, I'm sure I've missed some details ... We'll mait for a translation ...
Daithiiiiiiiii !! (who is a irish french drômois ! :D )
Google Translate anyone??
Je sais que les rosbifs aime le "tuning" mais la ça va loin
De tout façon je ne suis même pas sur que Google peut traduire tout ça :lol: :lol:
Quelqu'un a deviner quelle genre de deuch se cache dessous tout ça
Un type de 86ans née en 1966??? Google va exploser
- Daithi
- Deuchiste intéressé
- Messages : 80
- Enregistré le : 17 mai 2017, 22:10
- Ma deuche : 2CV AZ A 15 juillet 1969
- Date de naissance : 14 juil. 1969
- Localisation : Irlande sur Drôme
Re: An english man in 2cv-Legend !
old2cvman a écrit :Hello all readers: I sustained suspension damage to my 52 year old 2.C.V. on January 12th 2018, going over a road speed Bump Block and then immediately hitting a huge pot hole on the road adjacent to this slowing down traffic hazard.
The next thing my nearside suspension drooped over dramatically scrapping the exhaust along the ground.
It happened only a mile from my house front so I was able to get my car home, but driving it up on my slope front was a chore.
Next day I was under the Car on my Back... absolute Freezing weather conditions examining the havoc... I had to face.
Eventually stripping all the exhaust system and the suspension cylinder, of the under side of my vehicle... a Chore to an 86 years of age veteran Citroen man.
The internal spring in the Cylinder had torn the end right of, and gunge every were, a real tough job for any enthusiast D.I.Y. man.... however I managed to re manufacture the Cylinder, and I also obtained a secondary internal spring which I cut into 2 segments of 3 coils , which I inserted to stiffen up the suspension... then I re welded the end cap back on the cylinder, as a extra Bonus , I obtained a tall Stainless Steel Office waste Paper collector Bin, which cut into to sections length wise, with an thin blade Angle grinder, and fabricated it around the cylinder as a second coat, I also made metal strapping bands to go around the cylinder to secure them with a bolt through .
I also did a similar operation and re manufactured a new exhaust system.... this has taken several days weather permitting , but I Triumphed yet again.... Ingenuity was the Mother of Invention... thats always been my Motto.
En gros, mais vraiment en GROS.........(les photos sont assez parlent)....notre ami à eu un rencontre malheureuse avec un ralentisseur & un nid de poule, pas mal de dégâts, réparer par un temps so British (ça veut dire , pas clément ) avec en bonus une poubelle de cuisine en inox découper pour "habiller" tout ça.
& ensuite, il à refait la ligne d’échappement...................son "devise" -----------"ingéniosité est la mère de l'invention" ou quelque chose comme ça, du Platon, un peu prés
- Deuchémoi
- Docteur deuchiste
- Messages : 14868
- Enregistré le : 19 sept. 2009, 17:09
- Ma deuche : 2cv6 Spécial AZKA Bleue céleste 11/87
- Date de naissance : 30 oct. 1968
- Localisation : Vitrolles (13) ... au soleil !!!
Re: An english man in 2cv-Legend !
Ha ben j'avais pigé tout ça, môa !!!Daithi a écrit : En gros, mais vraiment en GROS.........(les photos sont assez parlent)....notre ami à eu un rencontre malheureuse avec un ralentisseur & un nid de poule, pas mal de dégâts, réparer par un temps so British (ça veut dire , pas clément ) avec en bonus une poubelle de cuisine en inox découper pour "habiller" tout ça.
& ensuite, il à refait la ligne d’échappement...................son "devise" -----------"ingénuité est la mère de l'invention" ou quelque chose comme ça, du Platon, un peu prés
So, finalement, je parle presque mieux le Shakespeare than you !!! :P
Bon, moi j'avais traduit Ingenuity par ingéniosité, l'ingénuité devant être un anglicisme !!! :roll:
Merci quand même de ton aide !
:D
Pas de demande d'aide mécanique en Message Privé. Toutes les demandes se font dans les salons publics. Merci !
/¯\(°\=/°)... Ma présentation
2cv6 Spécial AZKA Bleue céleste 11/87
- Daithi
- Deuchiste intéressé
- Messages : 80
- Enregistré le : 17 mai 2017, 22:10
- Ma deuche : 2CV AZ A 15 juillet 1969
- Date de naissance : 14 juil. 1969
- Localisation : Irlande sur Drôme
Re: An english man in 2cv-Legend !
Deuchémoi a écrit :Ha ben j'avais pigé tout ça, môa !!!Daithi a écrit : En gros, mais vraiment en GROS.........(les photos sont assez parlent)....notre ami à eu un rencontre malheureuse avec un ralentisseur & un nid de poule, pas mal de dégâts, réparer par un temps so British (ça veut dire , pas clément ) avec en bonus une poubelle de cuisine en inox découper pour "habiller" tout ça.
& ensuite, il à refait la ligne d’échappement...................son "devise" -----------"ingénuité est la mère de l'invention" ou quelque chose comme ça, du Platon, un peu prés
So, finalement, je parle presque mieux le Shakespeare than you !!! :P
Bon, moi j'avais traduit Ingenuity par ingéniosité, l'ingénuité devant être un anglicisme !!! :roll:
Merci quand même de ton aide !
:D
ingéniosité parfaitement, faut de frappe(ou plutôt correction automatique ) de ma part
- helios
- Docteur deuchiste
- Messages : 1287
- Enregistré le : 23 févr. 2017, 13:14
- Ma deuche : 2cv AZKB
- Date de naissance : 03 juil. 1964
- Localisation : Ensues la redonne
Re: An english man in 2cv-Legend !
bienvenue
- Deuchémoi
- Docteur deuchiste
- Messages : 14868
- Enregistré le : 19 sept. 2009, 17:09
- Ma deuche : 2cv6 Spécial AZKA Bleue céleste 11/87
- Date de naissance : 30 oct. 1968
- Localisation : Vitrolles (13) ... au soleil !!!
Re: An english man in 2cv-Legend !
Trop fort !!Daithi a écrit : faut de frappe(ou plutôt correction automatique ) de ma part
Pas de demande d'aide mécanique en Message Privé. Toutes les demandes se font dans les salons publics. Merci !
/¯\(°\=/°)... Ma présentation
2cv6 Spécial AZKA Bleue céleste 11/87
- Math 2cv
- Docteur deuchiste
- Messages : 1187
- Enregistré le : 26 juil. 2016, 11:18
- Ma deuche : 2cv type A de février 1952
- Date de naissance : 25 mai 2000
- Localisation : Haute Savoie - Lac Léman
- Âge : 23
Re: An english man in 2cv-Legend !
(je traduis dans les deux langues / i traduce in the two languages)
in french:
Bienvenue sur le forum. Je traduis en anglais grâce à un site internet donc la traduction peut parfois être mauvaise.
Pour le problème de suspension, tu peux écrire un message dans la rubrique appropriée, mais à première vue, pour repartir sur une suspension neuve, il est nécessaire d'acheter deux pots de suspension complet déjà monter ou alors à souder soi-même (cela se change par deux obligatoirement) pour la somme de 200 euros chacun environ. C'est la meilleure solution pour plus de sécurité à mon avis.
in english:
Welcome to the forum. Thus I translate into English thanks to a web site so the translation can sometimes be bad.
For the problem of suspension, you can write a message in the appropriate column, but at first sight, to leave on a new suspension, it is necessary to buy two jars of suspension complete already to go up or then to weld oneself (it changes by two necessarily) for the 200-euro sum each approximately. It is the best solution for more safety in my opinion.
Goodbye
in french:
Bienvenue sur le forum. Je traduis en anglais grâce à un site internet donc la traduction peut parfois être mauvaise.
Pour le problème de suspension, tu peux écrire un message dans la rubrique appropriée, mais à première vue, pour repartir sur une suspension neuve, il est nécessaire d'acheter deux pots de suspension complet déjà monter ou alors à souder soi-même (cela se change par deux obligatoirement) pour la somme de 200 euros chacun environ. C'est la meilleure solution pour plus de sécurité à mon avis.
in english:
Welcome to the forum. Thus I translate into English thanks to a web site so the translation can sometimes be bad.
For the problem of suspension, you can write a message in the appropriate column, but at first sight, to leave on a new suspension, it is necessary to buy two jars of suspension complete already to go up or then to weld oneself (it changes by two necessarily) for the 200-euro sum each approximately. It is the best solution for more safety in my opinion.
Goodbye
- RICMAN41
- Docteur deuchiste
- Messages : 3319
- Enregistré le : 03 août 2014, 18:47
- Ma deuche : 2cv(79,85)AKpickup(76)Acadiane(85)
- Date de naissance : 03 févr. 1972
- Localisation : Ouzouer le marché 41
- Âge : 52
Re: An english man in 2cv-Legend !
Hello l'English
C'est quoi cette chiotte !!! du made in Liverpool !!!
C'est quoi cette chiotte !!! du made in Liverpool !!!
Quand on roule en 2 pattes on redonne le sourire aux passants , nos frais kilométriques devraient être remboursés par la sécurité social
La remise en forme de Titine : viewtopic.php?f=5&t=7693
ma présentation:viewtopic.php?f=1&t=7110
- zamzam
- Docteur deuchiste
- Messages : 6409
- Enregistré le : 22 juin 2011, 21:10
- Ma deuche : azam 11/64 ; azlp po 06/59
- Date de naissance : 27 juil. 1959
- Localisation : Nord bassin d'Arcadichon / Couches du trhone
- Âge : 64
Re: An english man in 2cv-Legend !
Welcome old2cvbatman.... heu....2cvman :oops:
ça fait longtemps que je le couvais ... j'ai fait une rechute !
La 2CV : la seule voiture "open source"
La 2CV : la seule voiture "open source"
- JC 34
- Docteur deuchiste
- Messages : 2340
- Enregistré le : 02 févr. 2011, 19:51
- Ma deuche : Ami 8 Berline 1977
- Date de naissance : 01 oct. 1951
- Localisation : Frontignan dans l'Herault
- Âge : 72
Re: An english man in 2cv-Legend !
:enerve: :pleurs: :flingue:
- Math 2cv
- Docteur deuchiste
- Messages : 1187
- Enregistré le : 26 juil. 2016, 11:18
- Ma deuche : 2cv type A de février 1952
- Date de naissance : 25 mai 2000
- Localisation : Haute Savoie - Lac Léman
- Âge : 23
Re: An english man in 2cv-Legend !
je l'aurais pas dit comme ça mais je partage l'idée !! La déco c'est toujours avec parcimonie !RICMAN41 a écrit :C'est quoi cette chiotte !!! du made in Liverpool !!!
- Poyducotam
- Deuchiste de référence
- Messages : 758
- Enregistré le : 02 nov. 2015, 19:41
- Ma deuche : aucune... pour l'instant
- Date de naissance : 23 août 1966
- Localisation : Finistère nord (Brest)
Re: An english man in 2cv-Legend !
Welcome on board of The Legend ^^
You seems to be keen on DIY technics
And fixing a "duck" the way you didi is the best example to show it :D
You seems to be keen on DIY technics
And fixing a "duck" the way you didi is the best example to show it :D
- old2cvman
- Deuchiste intéressé
- Messages : 79
- Enregistré le : 27 janv. 2018, 21:24
- Ma deuche : A Deuche modifications Doctor with 63 years experiences on rebuilds
- Date de naissance : 15 sept. 1931
- Localisation : liverpool. england
- Âge : 92
Re: An english man in 2cv-Legend !
Hello all readers.... Old2cvman... is back again... I am bewildered at the response, that my original Story generated..... Hence my photographic catalogue of events... which I felt would illustrate my predicament and how I rectified my sustained underside vehicular damage.
Some one thinks I dreamed up this situation, which is a ridiculous assumption, when reading response posts.... even at the ripe old age of just 86, I am still anxious to learn about Citroen 2 C.V. vehicles.
I bought my first 2.C.V. at Easter Holidays 1955.... see my attached picture.... over the period I ran this little Camionette, I extensively modified its appearance ... and travelled to Monte Carlo in it several times from Liverpool. England a distance of 1362 miles... in this it was a 40 hours drive none stop.... apart from 2 hours crossing the channel Dover to Calais.
As my married life progressed.. my taste in vehicles had to change to a family Car.. but I still had a Love affair with 2 C.V.s
I bought a couple of scrappers .. and set about making, my own personnel 2.C.V. carravanette ... see my attached photographs..... which I subsequently used for my Monte Carlo adventures later in Life... as well as being a Juggernaut Jockey for 50 years World wide.... so readers I am not just some Old Dam fool writing dribble stories ... every thing I present is accurate.
Some one thinks I dreamed up this situation, which is a ridiculous assumption, when reading response posts.... even at the ripe old age of just 86, I am still anxious to learn about Citroen 2 C.V. vehicles.
I bought my first 2.C.V. at Easter Holidays 1955.... see my attached picture.... over the period I ran this little Camionette, I extensively modified its appearance ... and travelled to Monte Carlo in it several times from Liverpool. England a distance of 1362 miles... in this it was a 40 hours drive none stop.... apart from 2 hours crossing the channel Dover to Calais.
As my married life progressed.. my taste in vehicles had to change to a family Car.. but I still had a Love affair with 2 C.V.s
I bought a couple of scrappers .. and set about making, my own personnel 2.C.V. carravanette ... see my attached photographs..... which I subsequently used for my Monte Carlo adventures later in Life... as well as being a Juggernaut Jockey for 50 years World wide.... so readers I am not just some Old Dam fool writing dribble stories ... every thing I present is accurate.
- zamzam
- Docteur deuchiste
- Messages : 6409
- Enregistré le : 22 juin 2011, 21:10
- Ma deuche : azam 11/64 ; azlp po 06/59
- Date de naissance : 27 juil. 1959
- Localisation : Nord bassin d'Arcadichon / Couches du trhone
- Âge : 64
Re: An english man in 2cv-Legend !
Hello !
Two things we are now sure : you are a true deuchiste and you are a true English !
( Deux choses dont nous sommes sûr maintenant : tu es un vrai deuchiste et tu es un vrai Anglais) (pour les francophones purs et durs :france1: )
Two things we are now sure : you are a true deuchiste and you are a true English !
( Deux choses dont nous sommes sûr maintenant : tu es un vrai deuchiste et tu es un vrai Anglais) (pour les francophones purs et durs :france1: )
ça fait longtemps que je le couvais ... j'ai fait une rechute !
La 2CV : la seule voiture "open source"
La 2CV : la seule voiture "open source"
- Deuchémoi
- Docteur deuchiste
- Messages : 14868
- Enregistré le : 19 sept. 2009, 17:09
- Ma deuche : 2cv6 Spécial AZKA Bleue céleste 11/87
- Date de naissance : 30 oct. 1968
- Localisation : Vitrolles (13) ... au soleil !!!
Re: An english man in 2cv-Legend !
Yeaaaaahhhhhhh !!!
I love this one so much:
PS:
I love this one so much:
PS:
So you can't be born in 1966 as said on your avartar, but no problem with that detail.I bought my first 2.C.V. at Easter Holidays 1955
Pas de demande d'aide mécanique en Message Privé. Toutes les demandes se font dans les salons publics. Merci !
/¯\(°\=/°)... Ma présentation
2cv6 Spécial AZKA Bleue céleste 11/87
- Poyducotam
- Deuchiste de référence
- Messages : 758
- Enregistré le : 02 nov. 2015, 19:41
- Ma deuche : aucune... pour l'instant
- Date de naissance : 23 août 1966
- Localisation : Finistère nord (Brest)
Re: An english man in 2cv-Legend !
Sometimes, I'd like to be English, for your pubs and your planes, the way you can modify a car (french rules are too stricts); but not fot your food :LOL
- renato13
- Docteur deuchiste
- Messages : 11374
- Enregistré le : 26 juil. 2011, 10:41
- Ma deuche : azlp grise 1960
- Date de naissance : 06 nov. 1955
- Localisation : istres
Re: An english man in 2cv-Legend !
Salut
il serai bien de passé au café deuchiste pour une présentation sil te plait !
et de penser qu'il y a des millions de membres sur se forum et tous ne lise pas
l' anglais , :france1:
- Poyducotam
- Deuchiste de référence
- Messages : 758
- Enregistré le : 02 nov. 2015, 19:41
- Ma deuche : aucune... pour l'instant
- Date de naissance : 23 août 1966
- Localisation : Finistère nord (Brest)
Re: An english man in 2cv-Legend !
Renato13 is right, you should post a new subject by fellowing link viewforum.php?f=1 so that members would welcome you
"Renato13 a raison, tu devrais poster un nouveau sujet en suivant le lien de manière à ce que les autres membres puissent te souhaiter la bienvenue "
"Renato13 a raison, tu devrais poster un nouveau sujet en suivant le lien de manière à ce que les autres membres puissent te souhaiter la bienvenue "